Google Ads Quality Score guide cover

Quality Score is one of the most talked-about numbers in Google Ads and one of the most misunderstood. Some advertisers chase a perfect 10 on every keyword; others ignore it completely. The useful middle ground is to treat it as what Google says it is: a diagnostic. It tells you where your ads, keywords and landing pages are out of step with what searchers want. This guide explains how Quality Score works, how it relates to what you pay, and a step-by-step way to improve Google Ads Quality Score without wasting time on keywords that do not matter.

What Is Google Ads Quality Score?

Quality Score is a rating from 1 to 10 that Google Ads gives each keyword in your Search campaigns. It estimates the quality of your ads and landing pages compared with other advertisers who showed ads for the same keyword. A higher score means that, for people searching that exact term, your ad and page are more relevant and useful than average.

Three points are worth knowing before you try to change it:

  • It is calculated per keyword, based on searches that match the keyword exactly, even if the keyword uses phrase or broad match.
  • It is a diagnostic, not an auction input. Google states that Quality Score itself is not used at auction time. The auction uses real-time quality signals that are more detailed, and Quality Score is a summary of how you have been doing.
  • It needs data. New or low-volume keywords show a dash (“—”) instead of a number until there are enough impressions to rate them.

The Three Quality Score Components

Google rates each keyword on three components. Each is shown as Above average, Average or Below average, compared with other advertisers on the same keyword. These ratings are far more useful than the 1 to 10 number, because they tell you what to fix.

1. Expected click-through rate (expected CTR)

How likely your ad is to be clicked when it shows for this keyword. Google adjusts for factors such as ad position and ad formats, so it is not simply your actual CTR. A Below average rating usually means the ad does not look like the obvious answer to the search: the headline is generic, the offer is weak, or the keyword triggers searches with mixed intent.

2. Ad relevance

How closely your ad matches the intent behind the keyword. If your ad group contains “emergency plumber”, “bathroom remodel” and “water heater repair”, one set of ads cannot be closely relevant to all three. Below average ad relevance is almost always a structure problem.

3. Landing page experience

How relevant and useful your landing page is to people who click. Google looks at whether the page gives searchers what they were looking for, whether it is easy to use on mobile, how quickly it loads, and whether it is transparent about your business and offer. Sending every click to your home page is the classic cause of a Below average rating.

How Quality Score Relates to Ad Rank and Cost

Your ad’s position and whether it shows at all are decided by Ad Rank, which Google calculates fresh in every auction. According to Google, Ad Rank considers your bid, the quality of your ads and landing page at the time of the search, Ad Rank thresholds, the competitiveness of the auction, the context of the search (device, location, time, other ads) and the expected impact of your assets, such as sitelinks and callouts.

Quality Score is not in that list by name, but its three components describe the same things the auction measures in real time. That is why improving them tends to pay off. Google’s own guidance is that higher-quality ads can lead to lower costs and better ad positions, because you need a lower bid to reach the same Ad Rank. You will see blog posts that quote exact percentages for how much each Quality Score point saves. Treat those with caution: the real effect depends on your market, competitors and bidding strategy, and Google does not publish a formula.

Where to Find Quality Score in Google Ads

  1. Open your account and go to Campaigns > Audiences, keywords and content > Search keywords.
  2. Click the columns icon, then Modify columns.
  3. Open the Quality Score section and add Quality Score, Landing page exp., Exp. CTR and Ad relevance.
  4. Optionally add the “(hist.)” versions of the same columns. These show the last known value for a date range, which lets you compare before and after a change.
  5. Save the column set so you do not have to rebuild it every time.

Then add Cost and Conversions if they are not already visible. You will need them for the next step.

How to Improve Google Ads Quality Score: Step by Step

Step 1: Prioritize by spend, not by score

Sort your keywords by cost for the last 30 or 90 days. The top 20 percent of keywords usually account for most of the spend, and that is where an improvement is worth having. A keyword with a score of 3 that spent almost nothing is not a priority. A keyword with a score of 5 that eats a third of your budget is.

For each high-spend keyword, write down which of the three components is Below average. That tells you which of the following steps to use.

Step 2: Fix ad relevance with tighter ad groups

If ad relevance is Below average, split the ad group so each one covers a single, specific theme. You do not need one keyword per ad group, an approach that made more sense before close variants and broad match changed how matching works. You need groups where one set of ads can honestly answer every keyword in the group.

  • Group keywords that a searcher would expect the same answer for: “emergency plumber”, “24 hour plumber”, “plumber near me now”.
  • Move keywords with different intent, such as “plumber salary” or “how to fix a leaking tap”, out of the group. Many belong in your negative keyword list.
  • Write headlines that use the language of the group. Include the main term in at least two or three headlines, worded naturally.

Step 3: Improve expected CTR with sharper ad copy

Expected CTR improves when the ad looks like the best answer on the page. In a Responsive Search Ad you can provide up to 15 headlines and 4 descriptions, so use the space to test different angles:

  • Specific offer: a concrete price, guarantee, delivery time or free consultation, if it is true.
  • Proof: years in business, certifications or awards you can verify.
  • Next step: “Book a same-day visit”, “Get a free quote in 2 minutes”.
  • Search language: repeat the problem the searcher typed, not your internal product name.

Keep every headline readable on its own, because Google combines them in different orders. Headlines are limited to 30 characters and descriptions to 90, so check your copy with the Google Ads Copy Length Checker before you upload it. Our guide to Google Ads RSA character limits explains how to write copy that fits.

Add relevant assets too: sitelinks, callouts and structured snippets make the ad larger and more useful, and Google includes the expected impact of assets in Ad Rank.

Step 4: Clean up search terms with negative keywords

Quality Score is rated on exact-match searches, but your expected CTR in practice is hurt when broad or phrase match keywords show your ads for irrelevant searches. Open the Search terms report every week while a campaign is new, and every month after that. Add negatives for searches that will never convert: jobs, free, DIY, competitor names you do not want, or services you do not offer. Fewer irrelevant impressions mean the people who see your ad are the ones who want it.

Step 5: Fix landing page experience

If landing page experience is Below average, look at the page through the eyes of someone who just clicked the ad:

  • Message match. The headline on the page should repeat the promise of the ad. If the ad says “Same-Day Boiler Repair”, the page should say that above the fold, not “Welcome to Our Company”.
  • One page per intent. Send each ad group to the most specific page you have. Build a dedicated page for high-spend themes if no good page exists.
  • Speed and mobile. Test the page in PageSpeed Insights. Compress images, remove unused scripts and pop-ups, and make sure the form or call button is easy to tap on a phone.
  • Transparency. Show who you are, how to contact you, prices or how pricing works, and what happens after someone submits the form.
  • Crawlable. Google needs to be able to fetch the page. If robots.txt or a firewall blocks Google’s ad crawler, the page cannot be evaluated properly.

Before you change a page, preview how its title and description appear in search with the SERP Snippet Preview. Pages that serve both organic and paid traffic benefit from one clear, consistent message.

Step 6: Give changes time, then measure

Quality Score updates as new data comes in, so it can take a few weeks of traffic before ratings move. Use the “(hist.)” columns and compare the same date ranges before and after your change. More important than the score itself, check whether CTR, cost per click and cost per conversion improved. Tag your landing page URLs consistently (see our guide to UTM naming conventions and the free UTM Builder) so you can compare results across ad platforms in GA4.

A Worked Example

Imagine a local accountant with one ad group called “Tax Services” containing “tax return accountant”, “self-employed tax help”, “corporation tax accountant” and “bookkeeping services”. Every ad says “Expert Accountants in Leeds” and points to the home page.

In the keyword report, the two highest-spend keywords show ad relevance and landing page experience as Below average. The fix:

  1. Split the group into three: personal tax returns, small business and limited company tax, and bookkeeping.
  2. Write ads for each group that use the searcher’s words: “Self-Employed Tax Return Help”, “Fixed-Fee Tax Returns”, “Book a Free 15-Min Call”.
  3. Point each group at the matching service page, and add a clear price range, an FAQ and a short contact form to each page.
  4. Add negatives for “jobs”, “course”, “software” and “free template”.

After a few weeks, the accountant compares cost per lead before and after. The Quality Score numbers are a check that the changes were the right kind; the cost per lead is the result that matters.

Common Quality Score Myths

  • “Pausing low-score keywords raises your scores.” Pausing a keyword removes it from your averages, but it does not improve the remaining keywords. Pause keywords because they waste money, not to make a report look better.
  • “Ad copy length affects Quality Score.” Length is not a factor. Relevance and appeal are. A short, specific headline often beats a long one.
  • “A 10/10 is the goal.” The goal is profitable conversions. A keyword with a 6 that converts at a good cost is doing its job.

Quality Score With Smart Bidding, Broad Match and Performance Max

Automated bidding sets bids for each auction using many signals, but it still works within Ad Rank, so relevance and landing page quality still affect what you pay and where you appear. Broad match makes clean ad groups and good negative keywords more important, not less, because the ad can show for a wider range of searches. Performance Max campaigns do not report keyword Quality Score at all, but the same principles apply to the assets and landing pages you give them.

If you are investing in AI search visibility as well as paid search, the same idea of matching content to intent applies. Our guide to AEO and GEO covers how answer engines choose which pages to cite.

Quality Score Checklist

  • Add Quality Score and its three components to your keyword view and save the column set.
  • Sort by cost and focus on the keywords that spend the most.
  • Split ad groups that mix different intents.
  • Use the searcher’s language in headlines and test specific offers.
  • Review search terms and add negatives regularly.
  • Send each ad group to the most specific, fast, mobile-friendly page.
  • Measure CTR, CPC and cost per conversion, not just the score.

Want a second opinion on your account? Get in touch for help with Google Ads setup and management, or request a free SEO audit of the landing pages your ads point to.

Frequently asked questions

What is a good Quality Score in Google Ads?

A score of 7 or higher means your ads and landing page compare well with other advertisers on that keyword. Scores of 5 or 6 are average. Focus on the three component ratings, because a Below average rating tells you exactly what to fix.

Is Quality Score used in the Google Ads auction?

Not directly. Google says Quality Score is a diagnostic tool and is not used at auction time. The auction uses real-time measures of expected CTR, ad relevance and landing page experience, which is why improving those components still matters.

Why does my keyword show no Quality Score?

A dash means Google does not yet have enough impressions from exact searches for that keyword to rate it. New and low-volume keywords often show a dash until they collect more data.

How long does it take to improve Quality Score?

Ratings update as new impressions and clicks come in. On keywords with steady traffic you can often see a change within a few weeks of fixing ads or landing pages. Low-volume keywords take longer.

Tahir Mahfooz is an SEO and paid ads specialist based in Lahore, Pakistan. He works with ecommerce and service brands on technical and on-page SEO audits, AEO reviews, Google Ads and Meta Ads campaigns, and builds the tools and guides on Improve My Website SEO.

Leave a Reply

Your email address will not be published. Required fields are marked *